Ateq International Site Map

ATEQ PL (En) | Homepage

Ateq F5200
  • Leak & Flow
  • Leak & Flow
  • Leak & Flow

Ateq F5200

ATEQ F5200 is the fastest and, thanks to the color touch screen, the most user-friendly leak tester among leak detectors for production lines, manual stations and laboratories.

The color touch screen allows easy switching between different ways of results presentation as numerical values, pressure and leakage graphs, statistical distributions, bar graphs, etc.

The device is designed specifically for automated testing stations and, in addition to the measurement precision and speed, it enables communication with production line controllers using such protocols as: ModBus, ProfiBus, ProfiNet, DeviceNet, EtherNet TCP/IP, etc.

  • Graphic user-friendly interface with color touch screen
  • Leakage measurement by pressure drop method, differential (with or without reference element)
  • Various pressure drop measurement ranges (ΔP). Full scale: 50 Pa, 500 Pa or 5000 Pa
  • Operating modes:
    • ΔP – pressure drop measurement
    • ΔP/Δt – pressure drop rate measurement
    • measurement in leak / flow units (e.g. ml/min)
    • clogging detection (blockage test)
    • others, depending on your application
  • Accelerated test part filling system with compressed air to test pressure
  • Possibility of programming 32 test programs
  • Communication:
    • RS232: printer, barcode reader, PC computer
    • RS485: ATEQ instruments industrial network
    • Ethernet/TCP: LAN network, PLC controller
    • USB: transfer to external USB memory (parameters, results, statistics, …)
    • Available communication protocols: ModBus, ProfiBus, DeviceNet, ProfiNet.
  • 7 inputs / 5 outputs board – enables selection of 32 programs, test cycle START/STOP, OK/NOK result signals, etc.
  • Date and time indication, language and unit selection, ability to adapt tests to your requirements, automatic measurement cycle, …
  • Electronic regulator for automatic test pressure adjustment
  • Measuring range for pressure, vacuum or pressure and vacuum simultaneously (overpressure and underpressure)
  • Calibrated leak standard masters (orifice, nozzle)
  • Closed component test
  • Quick connector for calibration check
  • 2 pneumatic outputs for automation control
  • Connections to the test item
  • Programmable 6 x 24 V outputs for external devices
  • 2 analogue outputs 0-10V or 4-20mA
  • Automatic calibration check mode
  • Temperature compensation
  • Pressure and leak calibrator

Automotive industry:
leak testing of engines and engine assemblies, brake systems, fuel systems, shock absorbers, lamps and reflectors, gearboxes, fuel tank caps, non-return valves, cylinder heads, filters, coolers, seals, oil and water circulation systems, …

Electric vehicles:
leak testing of electric motors, batteries, battery housings, battery cells and modules, cooling systems, electric gears, plugs and sockets, electric cables, bipolar plates, electrodes, …

Electronics:
leak testing of mobile phones, watches, tablets, displays, cameras, lidars, small electronics components, relays, sensors, …

Household appliances:
leak testing of water and gas fittings, gas cookers, steam irons, gas heaters, percolators, automatic washing machines, …

Medical industry:
leak testing of catheters, dialysis devices, micro-pipettes, plastic taps, drain tanks, syringes, valves, …

Packaging:
leak testing of aerosol spray tanks and valves, hand pump sprays, inkjet printer cartridges, cosmetic bottles, food bags, containers, packaging, …

PRESSURE DROP MEASUREMENT ΔP
RANGE ACCURACY MAX RESOLUTION
0 – 50 Pa ± ( 2% dP + 0.5 Pa ) 0.01 Pa
0 – 500 Pa ± ( 2.5% dP + 1 Pa ) 0.1 Pa
0 – 5000 Pa ± ( 2.5% dP + 10 Pa ) 1 Pa
*dP – measured pressure drop value
PRESSURE MEASUREMENT
RANGE ACCURACY
Pmax = 75 mbar ± ( 1.5% P + 0.2 mbar )
P < 0,3 bar ± ( 1.5% P + 1 mbar )
0,3 < P < 1 bar ± ( 1.5% P + 3 mbar )
1 < P < 5 bar ± ( 1.5% P + 7.5 mbar )
5 < P < 10 bar ± ( 1.5% P + 15 mbar )
10 < P < 20 bar ± ( 1.5% P + 30 mbar )
*P – measured pressure value

MECHANICAL PRESSURE REGULATOR
from -800 to -20 mbar • from 5 to 140 mbar • from 50 to 500 mbar • from 0,2 to 4 bar •
• from 0,5 to 9 bar • from 0,5 to 16 bar

ELECTRONIC PRESSURE REGULATOR
from -800 to -20 mbar • from 10 to 200 mbar • from 20 to 500 mbar • from 0.1 to 1 bar •
• from 0.2 to 2 bar • from 0.5 to 5 bar • from 1 to 10 bar • from 1 to 16 bar • from 1 to 20 bar •
• from -800 mbar to +1 bar • from -800 mbar to +4 bar • from -800 mbar to +10 bar