Ateq International Site Map

ATEQ PL (En) | Homepage

Ateq F620
  • Leak & Flow
  • Leak & Flow
  • Leak & Flow

Ateq F620

COMPACT LEAK DETECTOR

After 40 years of experience and 100 000 leak detectors and flow testers installed worldwide, ATEQ presents its revolutionary compact leak tester operating on the principle of differential pressure drop measurement.

ATEQ F620 is a new Series 6 generation of leak detectors with:

  • new design differential pressure transducers
  • new electronic and pneumatic modules
  • new user-friendly interface
  • new accessories and functions

The innovative technology of the Series 6 instruments was created to provide customers with industrial devices that meet the demand for quick and reliable leak testing as well as user-friendly operation.

  • Graphic user-friendly interface with high-contrast color screen
  • Leakage measurement by pressure drop method, differential (with or without reference element)
  • Various pressure drop measurement ranges (ΔP). Full scale: 50 Pa, 500 Pa or 5000 Pa
  • Operating modes:
    • ΔP – pressure drop measurement
    • ΔP/Δt – pressure drop rate measurement
    • measurement in leak / flow units (e.g. ml/min)
    • clogging detection (blockage test)
    • durability testing (burst test)
    • others, depending on your application
  • Accelerated test part filling system with compressed air to test pressure
  • Possibility of programming 128 test programs
  • Communication:
    • RS232: printer, barcode reader, PC computer
    • USB «master»: transfer to external USB memory (parameters, results, statistics, …)
    • USB «slave»: supervision
    • Ethernet/IP or USB «master» on the front panel or SD reader for saving results.
    • Available communication protocols: ModBus, ProfiBus, DeviceNet, ProfiNet, EtherNet/IP, EtherCAT.
  • 9 inputs / 7 outputs board – enables selection of 128 programs, test cycle START/STOP, OK/NOK result signals, etc.
  • Date and time indication, language and unit selection, ability to adapt tests to your requirements, automatic measurement cycle, …
  • Electronic regulator for automatic test pressure adjustment
  • Measuring range for pressure, vacuum or pressure and vacuum simultaneously (overpressure and underpressure)
  • Calibrated leak standard masters (orifice, nozzle)
  • Closed component test
  • Quick connector for calibration check
  • 2 pneumatic outputs for automation control
  • Connections to the test item
  • Programmable 6 x 24 V outputs for external devices
  • 2 analogue outputs 0-10V or 4-20mA
  • Automatic calibration check mode
  • Temperature compensation
  • Pressure and leak calibrator

Automotive industry:
leak testing of engines and engine assemblies, brake systems, fuel systems, shock absorbers, lamps and reflectors, gearboxes, fuel tank caps, non-return valves, cylinder heads, filters, coolers, seals, oil and water circulation systems, …

Electric vehicles:
leak testing of electric motors, batteries, battery housings, battery cells and modules, cooling systems, electric gears, plugs and sockets, electric cables, bipolar plates, electrodes, …

Electronics:
leak testing of mobile phones, watches, tablets, displays, cameras, lidars, small electronics components, relays, sensors, …

Household appliances:
leak testing of water and gas fittings, gas cookers, steam irons, gas heaters, percolators, automatic washing machines, …

Medical industry:
leak testing of catheters, dialysis devices, micro-pipettes, plastic taps, drain tanks, syringes, valves, …

Packaging:
leak testing of aerosol spray tanks and valves, hand pump sprays, inkjet printer cartridges, cosmetic bottles, food bags, containers, packaging, …

PRESSURE DROP MEASUREMENT ΔP
RANGE ACCURACY MAX RESOLUTION
0 – 50 Pa ± ( 1.5% dP + 0.5 Pa ) 0.01 Pa
0 – 500 Pa ± ( 1% dP + 1.5 Pa ) 0.1 Pa
0 – 5000 Pa ± ( 1% dP + 15 Pa ) 1 Pa
*dP – measured pressure drop value
PRESSURE MEASUREMENT
RANGE ACCURACY
full scale = 200 mbar ± 1% full scale
0,2 < full scale < 5 bar ± 1% full scale
5 < full scale < 10 bar ± 1% full scale
10 < full scale < 20 bar ± 1% full scale

 

MECHANICAL PRESSURE REGULATOR
from -800 to -20 mbar • from 5 to 140 mbar • from 50 to 500 mbar • from 0,2 to 4 bar •
• from 0,5 to 9 bar • from 0,5 to 16 bar

ELECTRONIC PRESSURE REGULATOR
from -800 to -20 mbar • from 10 to 200 mbar • from 20 to 500 mbar • from 0.1 to 1 bar •
• from 0.2 to 2 bar • from 0.5 to 5 bar • from 1 to 10 bar • from 1 to 16 bar • from 1 to 20 bar •
• from -800 mbar to +1 bar • from -800 mbar to +4 bar • from -800 mbar to +10 bar