Ateq International Site Map

ATEQ PL (En) | Homepage

Ateq H6000 (hydrogen)
  • Leak & Flow
  • Leak & Flow
  • Leak & Flow

Ateq H6000 (hydrogen)

ATEQ H6000 leak detector for precise detection and location of very small leaks, adapted for automatic, semi-automatic or manual operation in production lines, testing stations and laboratories.

Perfect solution for industries requiring leakage location and leak size measurement in g/year or ppm (parts per million).

The H6000 hydrogen leak detector operates on similar principles as helium leak detectors, but instead of helium it detects the presence of hydrogen. The hydrogen leak detector is used with technical gases, which are widely available, safe and cheap, like 95% NITROGEN (N2) with 5% HYDROGEN (H2) mixture.

Hydrogen leak detection has been widely used for years, mainly in Scandinavian countries and Germany. The mixture of Nitrogen and Hydrogen is an excellent gas for leak detection, and is also completely safe, as the gas is non-toxic, ecological, and non-flammable in contact with air.

Compared to vacuum leak testing, the hydrogen detector:

  • enables leak location,
  • is not dependent on the volume of the tested part,
  • is not sensitive to temperature fluctuations,
  • has much higher measurement sensitivity.

Compared to helium, the gas used by the hydrogen detector:

  • is much cheaper,
  • is the lightest of gases,
  • has lower viscosity,
  • expands faster inside the tested part,
  • reaches and penetrates defects quicker,
  • is easier to remove and ventilate,
  • disperses quickly after leaking into the atmosphere,
  • enables quick resumption of testing even after detecting very large leaks,
  • is environmentally friendly according to ISO 14001.

 

Automotive industry:
leak detection and leak location in engines and engine assemblies, fuel systems, radiators, air conditioning systems, injection systems, turbochargers, shock absorbers, oil and water circulation systems, …

Household appliances:
leak detection and leak location in compressors, refrigerators, gas heaters, …

Fittings and gas industry:
leak detection and leak location in valves and gas installations, refrigeration and air conditioning systems, …

  • Leakage measurement and location by gas detection method
  • Test medium: 95% NITROGEN (N2) with 5% HYDROGEN (H2) mixture
  • Leak measurement range from 5 to 100 ppm
  • Measurement independent of part volume and temperature
  • Operating modes:
    • precise measurement by accumulating leaking gas in a test chamber, before passing the gas sample to the sensor
    • leak location using a probe passing sampled gas to the sensor
  • Possibility of programming 32 test programs
  • USB port
  • Date and time indication, language and unit selection, ability to adapt tests to your requirements, automatic measurement cycle, …
  • IP54 case
  • Industrial version with power supply and inputs / outputs board for selection of programs, test cycle START/STOP, OK/NOK result signals, etc.
  • Portable version with 12 V DC 4400 mA/h battery and charger